中文 English

油性

油漆笔 PM-7015

Item NO.:PM-7015

Material:PP

Size:163*26mm

Write line:15mm

Package:6pcs/box  192pcs/ctn

Nib:Taking Japanese,special acrylic nib,be outflow smooth

Features:Use for any surfaces,such as metal,Glass,wood,stone,plastic,tire paper and so on

http://kaicong-pen.com/UploadFiles/image/20150414/20150414141634433443.jpg

Specifications:

1)Dry rapidly and leave a clean,uniform

2)No benzene,toluene and xylene,non-toxic

3)Permanent, waterproof, lightfast, smudge-proof, opaque, completely low odor, no fumes

How to use:

a:Shake well with cap on and remove cap in up-right position

b:Exhaust air inside marker with pressing the nib by your thumb for several times

c:Press tip for a few seconds until tip filled with ink

d:Test on paper before use,cover tightly cap after use and store in horizontal position

http://kaicong-pen.com/UploadFiles/image/20150414/20150414141885508550.jpg

Warming:

一:Keep out of reach of children

二:Avoid inhaled or swallowed

三:Recap after use

http://kaicong-pen.com/UploadFiles/image/20150414/20150414141839303930.jpg





使用方法:
1、新笔使用前,首先将笔身上下摇动笔身数次,使笔管内油墨混合均匀。
2、将笔直立,笔咀向上,用手按下笔咀约3至4秒钟放手,以便将笔管内的空气释放(新笔处于完全密封状态,笔管内存有大量空气,压力过大会导致使用时油墨大量喷出)。
3、笔咀向下按压数次,直至墨水渗出便可使用,注意必须将按出的油墨用尽(油漆淡化)方可再次按压,防止油墨渗出过多。
4、书写后请盖紧笔帽存放。经过长时间再次使用时,笔咀出墨孔可能会被干涸墨水阻塞,将笔咀按压两次,溢出的墨水溶解笔咀便可使用(不宜将笔咀多次按压,以防墨水渗出过多)。


上一条:白板笔 W-028
下一条:液体粉笔 CK-815